Topologi

                                 TOPOLOGI

Router>enable

Router#conf

Router#configure

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hos

Router(config)#hostname router_Rini Dameria

Router(config)#exit

Router#

Router(config)#exit

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#ena

Router#enable

Router#conf

Router#configure ter

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hos

Router(config)#hostname Router_Rini

Router_Rini(config)#

Router_Rini(config)#

Router_Rini(config)#ena

Router_Rini(config)#enable pas

Router_Rini(config)#enable password 123456789

Router_Rini(config)#

Router_Rini(config)#in

Router_Rini(config)#interface fastEthernet 0/1

Router_Rini(config-if)#ip add

Router_Rini(config-if)#ip address 192.168.10.100 255.255.255.0

Router_Rini(config-if)#no sh

Router_Rini(config-if)#no shutdown

Router_Rini(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router_Rini(config-if)#ex

Router_Rini(config-if)#exit

Router_Rini(config)#exi

Router_Rini(config)#exit

Router_Rini#

%SYS-5-CONFIG_I: Configured from console by console

Router_Rini#wr

Router_Rini#write mem

Router_Rini#write memory

Building configuration...

Router_Rini#

[OK]